Why should you install a plastic water tank properly?
Today, in fact, more than 80% of consumers buy water tank products and install them themselves or pay electricians to install them. Because they are not technically knowledgeable and do not comply with regulations. of the manufacturer, so in the process of using it is not safe and the life of the product is reduced.
The water tank is a place to store water for our daily activities. In order to have a sturdy and safe water tank that is not affected by the weather when there is strong wind and thunderstorms, a sturdy base is needed. The solid pedestal will help the water tank be fixed in position, not displaced by the impact of wind and thunderstorms.
And you are not sure where to install the water tank?
So why dont you pick up the phone and call us so that our staff can advise you on plastic water tank installation services according to the correct process and safety.
Instructions on how to install a safe plastic water tank
Step 1: Remove the tank cover by turning it counter-clockwise.
- Step 2: Insert the quail into the water line. Note: Gaskets and bolts are on the inside of the tub. Unscrew the washer and bolt on the inside of the tub, turn and use a wrench to tighten the nut on the outside.
- Step 3: Flip the tank horizontally, thread the quail from the tank at the water line. Use the left hand to hold the quail, the right hand to turn the nut to prevent the quail from falling into the tub. Use a wrench to tighten the nut.
- Step 4: Put the tub back up vertically and close the lid by turning it clockwise.
- Step 5: Install water inlet, outlet water and discharge sediment according to use needs.
Tools to install plastic water tank at home
- Electric float valve.
- Electronic pliers.
- Speculum pliers.
- Water pliers.
- Cle.
- Melting ice.
- Screwdrivers.
- Screws.
- Glue (heat sealing machine).
Notes when installing plastic water tanks
Before mounting:
- Carefully check the details and spare parts.
- Prepare the necessary items: electric float valve, electric pliers, speculum pliers, water pliers, double elbows with river, wrench, melting tape, screwdrivers, screws, glue...
When performing the installation:
- Mount the tank in a flat place, with sufficient rigidity, good bearing capacity and the bearing positions must be balanced by the plastic tank with a monolithic structure, without individual tub legs.
- Install the tank in a well-ventilated location for easy maintenance, maintenance and product disassembly.
- When installing a water tank, the water inlet and outlet lines of the tank must face the direction of the nearest up and down water pipe.
- Avoid fire and high temperature damage
- Avoid sharp objects spilling, piercing the tub.
Absolutely do not install the water tank in the location:
- Should not be installed on, close to the edge of the wall, ceiling, or railing.
- Do not install water tank on rough surface, not enough load bearing capacity.
- Do not put bricks, stones, wood, .... The surface of the installation location of the tank must be hard, ensuring that it is not deformed during the time the tank is installed.
- Do not install above, near, above aisles, doors ... where many people pass by because this position can be dangerous for everyone if the water tank encounters unexpected problems.
